Filter
Top Products
Fluke 123/124
Users Manual
60
Solving Printing and Other
Communication Errors
RS-232 communication may cause problems. When
experiencing communication problems, try the following
remedies:
Make sure that the interface cable is connected to the
correct port on the printer or computer. If necessary
use the 9 pin to 25 pin adapter or gender changer.
Make sure that you have selected the correct printer
type. (To select printer type, see Chapter 1.)
Make sure that the baud rate matches with the printer
or computer. (To set the baud rate, see Chapter 1.)
Reset the RS-232 parameters to defaults.
Battery Testing of Fluke Accessories
When using battery operated Fluke accessories, always
check the battery condition of the accessory first on a
Fluke multimeter .