Filter
Top Products
Tips and Troubleshooting
Changing the Display
3
55
Changing the Display
Adjusting the Screen Contrast in Fluke 123
From the main menu, choose
CONTRAST.
Adjust the contrast of the screen.
Adjusting the Screen Contrast in Fluke 124
Switch from cursor control to
display control.
From the display control menu,
choose CONTRAST
Adjust the contrast of the screen.
Note
The new contrast adjustment of the screen is
saved in memory until a new adjustment is
made.
Setting the Grid Display
To choose a dotted grid, do the following:
Open the USER OPTIONS menu.
Highlight GRID TYPE.
Open the GRID TYPE submenu.
Choose DOTS.
Accept the new grid display.
Use LINES when you need a cross hatch pattern based
on the horizontal time and vertical divisions on the screen.
Use DOTS when you need vertical and horizontal division
dots as added reference points to the screen.