Filter
Top Products
- 27 -
Refer to the charts and illustrations on the following pages
to properly adjust for desired cutting height.
FIG. 14 FIG. 15
CASTER HEIGHT ADJUSTMENT AXLE HEIGHT ADJUSTMENT
These models have five (5) axle positions; four (4) 1/2" caster spacers;
one (1) 3/16" caster spacer, and four (4) blade spacers.
Pos. A
Pos. B
Pos. C
Pos. D
Pos. E
Axle Pivot Bolt
Axle
Adjustment
Holes
Place Jack
Here
Axle Adjustment Holes are actually
in the side of the rear deck.