Filter
Top Products
- 10 -
FIG. 2
UPPER HANDLE
HEIGHT ADJUSTMENT
3.8.1 Attach throttle cable to engine.
For Kohler, Kawasaki, and B&S 10.5 hp Engines
with
"positive"
detents in throttle cable for both idle and full throttle
positions.
a)Position the throttle control lever (on console) in
the full throttle (but not choke) position. You
will feel a detent when the throttle control lever
is approximately 3/4" from the upper end of the
slot -- this is the full throttle position.
b)Route the throttle cable along the right side of
the upper handle, under the fuel tank support and
to the left side of the engine.
c)Loosen clamp on engine control plate. (See Figures
3, 4 and 5). Attach inner wire of the throttle cable
to the control plate lever and position cable under
clamp,
do not
tighten clamp.
FIG 3
KOHLER SPEED CONTROL
(THROTTLE CABLE HOOK-UP)