Filter
Top Products
- 8 -
2.9.6 Cutting Height: Adjusts in 1/4" (.63 cm) or smaller
increments by various adjustments of caster spacers,
blade spacers and axle height, from 1” to 4 1/4”
(2.5 cm - 10.8 cm).
2.10 DIMENSIONS
2.10.1 Overall Width:
32" 36" 48"
♦
♦♦
♦
48”
◊
◊◊
◊
Discharge chute
42.45 in. 46.1 in. 58.1 in. 58.2 in.
down
107.8 cm 117.1 cm 147.6 cm 148.0 cm
Up
32.75 in. 36.4 in. 48.4 in. 48.1 in.
(transport only)
83.2 cm 92.5 cm. 122.9 cm 122.2 cm
32" 36" 48"
♦
♦♦
♦
48”
◊
◊◊
◊
Overall Length
78 in. 78 in. 74.7 in. 73.0 in.
198.1 cm 198.1 cm 189.7 cm 185.4 cm
Overall Height
40.0 in. 40.0 in. 40.0 in. 40.0 in.
101.6 cm 101.6 cm. 101.6 cm 101.6 cm
Tread Width
∗
∗∗
∗
32.05 in. 35.6 in. 35.6 in. 35.6 in.
81.4 cm 90.4 cm 90.4 cm 90.4 cm
Curb Weight
∗
∗∗
∗∗
∗∗
∗
374 lbs 391 lbs 431 lbs 439 lbs
170 kg 177 kg 196 kg 199 kg
∗
∗∗
∗
To outside of tires.
∗
∗∗
∗∗
∗∗
∗
Weights will vary slightly depending on engine option.
♦
♦♦
♦
For Serial No.s 150,000 through 159,999.
◊
◊◊
◊
For Serial No.s 160,000 and higher.
2.11 TORQUE REQUIREMENTS
BOLT LOCATION TORQUE
Blade/Cutter Housing Spindle Bolt ........ 75-80 ft-lbs.
Caster Bracket Mounts .................... 30-35 ft-lbs.
Cutter Deck/Engine Deck Mount ............ 30-35 ft-lbs.
Engine Mounting Bolts
Briggs & Stratton ................. 15-20 ft-lbs.
Kohler & Kawasaki ................. 25-30 ft-lbs.
Transmission Shifter Lever ............... 30-35 ft-lbs.
3. ASSEMBLY INSTRUCTIONS
3.1 Uncrate unit, leaving it on the pallet, place upper handle
assembly, fuel tank, and shifter lever at the rear of the
machine. Place casters at the front of the unit.
3.2 Place a length of 4" x 4" block between the front of the
cutter deck and the pallet.
3.3 Remove the bolt bag from the top of the fuel tank support.
3.4 Refer to Parts Manual to help you identify and locate parts
and their proper position.