Exmark Lazer Z Lawn Mower User Manual


 
- 7 -
2.3.3 Fuel Filter: Replaceable in-line
2.3.4 Fuel Shut Off Valve: in-line, 1/4 turn
2.4 SAFETY INTERLOCK SYSTEM
Operator must have the transmission in neutral and blades
disengaged to start engine. Release of Operator Presence
Control (OPC) levers will cause engine to stop if
transmission
is not in neutral and/or blade drive is engaged
.
2.5 STEERING/BRAKE CONTROL
Fingertip drive control levers provide independent control of
traction, braking and neutral to each drive wheel for moving,
stopping & power turning. Parking brakes are engaged by locking
drive control levers in the “brake” position.
2.6 TRANSMISSION
2.6.1 Peerless 700-061, five speeds forward and one reverse.
2.6.2 Speed range:
1st 2.0 mph (3.22 km/h) 4th 4.1 mph (6.60 km/h)
2nd 2.7 mph (4.35 km/h) 5th 6.2 mph (9.98 km/h)
3rd 3.5 mph (5.63 km/h) Rev 3.1 mph (4.99 km/h)
2.7 WHEEL DRIVE SYSTEM
Banded double A-Section V-belts, single top-side idlers and
replaceable bolt-on drive sheaves and brake drums.
(Single B-Section V-belts for the 32" Model)
2.8 TIRES
Drive Front Caster
Size........ 13 x 6.50 - 6 ...........9 x 3.50 - 4
(32" Model) . 13 x 5.00 - 6 ...........9 x 3.50 - 4
Quantity...........2 ...................... 2
Tread.......... Turf Saver/Turf Master ..... Smooth
Ply................4 ...................... 4
Pressure.... 14 psi (97 kPa).......... 22 psi (152 kPa)
Bearings.... Replaceable Ball ........ Replaceable Roller
2.9 DECK
2.9.1 Cutting Width:
Model 32 ......31.75 in. (80.7 cm)
Model 36 ......35.38 in. (89.9 cm)
Model 48 ......47.63 in. (120.98 cm) S/N 150,000 - 159,999
Model 48 ......47.25 in. (120.0 cm) S/N 160,000 & higher
2.9.2 Discharge: Right Side
2.9.3 Blade Size:
Model 32 ......16.25 (41.3 cm) - Qty. 2
Model 36 ......18.00 (45.7 cm) - Qty. 2
Model 48 ......16.25 (41.3 cm) - Qty. 3
2.9.4 Type of Drive: Manual engagement of belt with over-
center lock. Blade belt tension is adjustable via
turnbuckle. The 48 in. units have an additional belt
which is also adjustable.
2.9.5 Deck Mounting: Bolted directly to engine deck