Filter
Top Products
Operation
Product Overview
Figure 4
1. Motion control levers
5. Engine Controls (right
console)
2. Parking brake
6. Seat belt
3. Height of cut adjustment
7. Rollover Protection
System (ROPS)
4. Fuel cap (both sides)
Operation
Note: Determine the left and right sides of the
machine from the normal operating position.
Controls
Motion Control Levers
The motion control levers located on each side of
the console control the forward and reverse motion
of the machine.
Moving the levers forward or backward turns
the wheel on the same side forward or reverse
respectively. Wheel speed is proportional to the
amount the lever is moved.
Moving the levers outward from the center position
into the T-slot locks them in the neutral position
(
Figure 5).
Figure 5
1. Neutral lock position
(handles out)
5. Neutral (operate)
2. Neutral operate position
(handles in)
6. Reverse
3. Front of Unit
7. Neutral lock
4. Forward
Throttle Control
Located on right fuel tank.
The throttle is used to control engine speed. Moving
the throttle lever forward will increase engine speed
20