Filter
Top Products
Dimension One Spas - Aquatic Fitness System - Owner’s Manual
7
12. Press the Warmer (UP) Button and Cooler (DOWN) Buttons until
your desired water temperature appears. The Display Window
shows your Set Temperature for five seconds before reverting back
to the current water temperature.
If you have the Dual-Temp model with built-in spa, likewise set the spa
temperature using the + and – buttons. See the spa programming
section later in this manual for more details. (pg. 15)
The Display Window does not allow you to set the temperature above 104° F
(≅40°C). However, if the water temperature exceeds 104° F (≅40° C), the display will
show the actual temperature. Never get in water if the temperature exceeds 104°
F (≅40° C).
13. While heating the spa, inspect the pump unions and plumbing fittings for leaks. When you
have finished the inspection, you can reinstall the equipment compartment panel.
14. After completing the above steps, see the Water Care Guide (provided separately) to
ensure proper water chemistry.
15. Place the thermal cover on your Aquatic Fitness System to conserve energy and keep it
ready for use.