Filter
Top Products
14-9
14. PERIODIC SERVICE
Ex2900 / 3200 Operator's Manual
■ Cleaning the Radiator Cooling Screen, Cooling Fins and Oil Cooler Pipe
Avoid injury. Compressed air can cause debris and
dirt to powerfully fly a long distance:
●NEVER allow bystanders near the tractor.
●When using compressed air for cleaning, ALWAYS
wear protective goggles.
●Reduce compressed air pressure to 30 psi (210
kPa).
IMPORTANT: Avoid damage.
●The cooling screen, fins and pipe must remain clean in
order to ensure adequate air inflow to prevent engine
overheating.
1. Cleaning the Radiator Cooling Screen
1. Park the tractor safely.
2. Allow engine to cool completely.
3. Raise the hood.
4. Raise and remove the radiator screen.
5. Clean the screen with compressed air, brush or cloth.
(A) Radiator screen
2. Cleaning the Radiator Cooling Fins
1. Raise the hood.
2. Remove both engine side panels.
IMPORTANT: Avoid damage.
●When using compressed air, be careful not to damage
the cooling fins.
3. Remove any dirt and debris from the fins at the front
and rear of the radiator and from the fan with
compressed air.
4. By using compressed air, remove any dirt and debris
from the oil cooler pipe (only Ex3200).
5. Reinstall the radiator cooling screen.
6. Reinstall both engine side panels.
7. Lower the hood.
(A) Fins
(B) Oil cooler pipe (only Ex3200)
CAUTION
P3013742
(A)
P3013736
(A)
P3013742
(B)(A)