Cub Cadet EX2900 Lawn Mower User Manual


 
9-3
9. POWER TAKE OFF (PTO)
Ex2900 / 3200 Operator's Manual
Disengaging the Power Take Off (PTO)
(when the operator is seated on the operator's seat)
1. Run the engine at a low speed.
2. Fully depress the clutch pedal to disengage the clutch.
3. Push the selected Power Take Off (PTO) engagement
lever downward, then horizontally and pull the lever
slightly upward to the disengaged position.
(A) Rear Power Take Off (PTO) engagement lever
(B) Mid-Power Take Off (PTO) engagement lever
4. Release the clutch pedal.
IMPORTANT: Avoid damage.
Observe the driveline manufacturer's installation
instructions for driveline mounting angle and the length
of overlaps on the driveline shafts. An incorrectly
installed implement can promote wear of the driveline
and/or damage the tractor.
2. Installing an Implement to the Power Take Off (PTO) Drivelines
3013711
(A)
(B)