Filter
Top Products
7-7
7. OPERATING THE ENGINE
Ex2900 / 3200 Operator's Manual
1. Remove foot from the forward and
reverse drive pedals.
2. Run the engine at a lowest possible
speed.
3. Depress the clutch pedal to disengage the
clutch, and then depress the brake pedal.
4. After the tractor has completely stopped,
disengage the Power Take Off (PTO),
lower the implement (if installed) to the
ground and then, engage the parking
brake securely.
5. Run the engine at a lowest possible speed
for at least 2 minutes.
6. Turn the starter key switch to the OFF
position.
7. Remove the starter key switch.
8. Check that the engine and other
components have stopped running.
NEVER leave the operator’s seat while
any components are running.
(A) Forward drive pedal
(B) Reverse drive pedal
(C) Throttle control lever
(D) Rear Power Take Off (PTO) engagement lever
3. Shutting Down the Engine
A3013703
(A)
(B)
(C)
3013711
(D)