Filter
Top Products
OPERATION
CLEARING JAMS AND CLOGS
WARNING
Before inspecting,cleaningor servicingthe machine,
stop the engine and make sure that all moving parts
have come to a completestep° Disconnectthe spark
plug wire andsecure itaway fromthe sparkplug,
Failure to follow this instruction could result in
personal injury,
A clog or jam can cause the vacuuming and discharging
operations to decrease or even stop completely. If this
occurs, take the following steps:
1. STOP THE ENGINE IMMEDIATELY and wait for all
moving parts to stop. Disconnect the spark plug
wire and secure it away from the spark plug.
2. Check and clean, if necessary, the following areas in
the order given_
For all vacuuming operations:
1. Check that the collection bag is not overfilled
2. While the bag is removed, check that the discharge
opening is not clogged°
For walk-behind vacuuming:
1. Check that the vacuum inlet opening is not clogged.
2. Use a stick to clear away debris.
For using the blower deflector:
1. Check that the blower deflector discharge opening is
not clogged.
2. Use a stick to clear away debris,
For using the vacuum hose:
1. Check that the hose is not clogged_
2. Remove the hose and use a long stick to clear away
any debris from the vacuum inlet opening.,
26