Filter
Top Products
OPERATION
KNOW YOUR CHIPPERiVAC
READ THIS OWNER'S MANUAL AND SAFETY RULES
BEFORE OPERATING YOUR CHIPPERNACo Figure
17 identifies the following key features and controls on
your machine:
(A) COLLECTION BAG: Used to collect material
resulting from vacuuming or chipping operation,
(B) ENGINE CONTROL LEVER: Used to control the
speed of the engine
(C) ENGINE PRIMER: Provides additional fuel from the
carburetor to the cylinder for use when starting a cold
engine,,
(D) AIR CLEANER: Filters dirt which could damage
engine parts,
(E) CHIPPER CHUTE: Used to process small
branches.
(F) FUELTANK: Stores engine fuel
(G) RECOIL STARTER ROPE: Used to start the
engine_
(H) BLOWER DEFLECTOR: Directs air flow when
machine is used in blower configuration.
(I) SAFETY INTERLOCK ROD: Part of the safety
interlock system which stops the engine if either the
collection bag or blower deflector is not installed.
(J) VACUUM HOSE (OPTIONAL): Used for remote
vacuuming
(K) BAFFLE PLATE: Used with optional vacuum hose°
(L) VACUUM INLET CAP: Covers vacuum hose inlet
when machine is used for walk-behind vacuming or
chipping,
(M) SPARK PLUG: Provides spark for engine ignition
(N) VACUUM HEIGHT ADJUSTMENT LEVER: Allows
adjustment of the space between the bottom of the
machine and the ground,
!,1
!
N
N
!.
Figure 17: Features and Controls,
17