Filter
Top Products
HOWTO USEYOURPRESSUREWASHER
If you haveany problems operatingyour pressurewasher,
pleasecallthe pressure washer helplineat 1-800-222-3136.
Pressure Washer Location
PressureWasherClearance
WARNING
_ Exhaustheat/gases can ignitecombustibles,
structures or damagefuel tank causing a fire.
• Keepatleast5ft. (152cm)clearanceonall sidesofpressure
washerincludingoverhead.
Placepressure washer outdoors in an areathat will not
accumulate deadlyexhaustgas. DONOTplacepressure
washer where exhaustgas (A) could accumulateand enter
inside or be drawn into a potentially occupied building.
Ensureexhaustgas is kept awayfrom any windows, doors,
ventilation intakes, or other openingsthat can allow exhaust
gasto collect in a confined area. Prevailingwinds and air
currents should betaken into considerationwhen positioning
_ressurewasher.
WARHIHG
Runningengine gives off carbon monoxide, an
_ dorless, colorless, poison gas.
Breathingcarbon monoxide can causeheadache,
fatigue, dizziness,vomiting, confusion, seizures,
nausea,fainting or death.
. OperatepressurewasherONLYoutdoors.
• Keepexhaustgasfromenteringaconfinedareathrough
windows,doors,ventilationintakes,or otheropenings.
• DONOTstartor runengineindoorsor in anenclosedarea,
evenif windowsanddoorsareopen.
||
mJ
To Start Your Pressure Washer
To start your engine-poweredpressurewasher for the first
time, follow these instructions step-by-step. This starting
information also applies wheneveryou start the engine after
you have letthe pressurewasher sit idle for at least a day.
1. Placepressurewashernearan outsidewater source
capableof supplyingwater ata flow rategreaterthan
5.0gallons per minuteand no lessthan 20 PSIat pressure
washerend of gardenhose.
2. Checkthat high pressure hose istightly connectedto
spray gun and pump. SeeAssemblyfor illustrations.
3. Makesure unit is in a level position.
4. Connectgardenhose to water inlet on pressure washer
pump.
[ NOTICE
IDO NOT the without the connected
run
pump
water
supply
and turned on.
L amageto equipmentresultingfrom failureto followthis
instructionwillvoidwarranty.
5. Turn ONthe water, press red button on the gun and
squeezethe trigger to purgethe pump system of air and
impurities.
6. Attach nozzleextensionto spray gun. Tighten by hand.
Choosespray tip you want to use, pull back on collar of
nozzleextension, insert spray tip and releasecollar. Tug
on spray tip to makesure it is securely in place. See
How to UseSpray Tips.
8. Movefuel valve lever (B) to "On" position.
OFF