Craftsman 580.7523 Pressure Washer User Manual


 
9. Movethrottlelever(A)to"Fast"position,shownasa
rabbit.
10. Move choke lever (B) to "Closed" position.
12. When starting engine, position yourself as
recommendedand grasp starter grip handleand pull
slowly until you feel some resistance.Then pull rapidly
to start engine.
CLOSED
NOTE:Fora warm engine, be surethe choke lever is in the
"Open" position.
11. Move engine switch (6) to "On" position.
OFF
ON
IMPORTANT:Beforestarting the pressure washer, be sure
/ou arewearing adequatesafety goggles.
WARHIHG
,_ Riskof eyeinjury.
_Spray cansplash back or propel objects.
Alwayswearsafetygoggleswhenusingthis equipmentor in
vicinityof whereequipmentisin use.
Beforestartingthepressurewasher,besureyouarewearing
adequatesafetygoggles.
NEVERsubstitutesafetyglassesfor safetygoggles.
WARHIHG
Starter cord kickback(rapid retraction) can result
in bodily injury. Kickbackwill pull handand arm
_,_.< toward enginefaster thanyou canlet go.
Brokenbones, fractures, bruises, or sprains
could result.
* NEVERpullstartercordwithoutfirst relievingspraygun
pressure.
* Whenstartingengine,pullcordslowlyuntilresistanceis felt
andthenpullrapidlyto avoidkickback.
* Aftereachstartingattempt,whereenginefailsto run,always
pointspraygunin safedirection,pressredbuttonandsqueeze
sprayguntriggerto releasehighpressure.
* Firmlygraspspraygunwith bothhandswhenusinghigh
pressuresprayto avoidinjurywhenspraygunkicksback.
13. Return recoil starter slowly. DO NOTlet rope "snap
back" against starter.
14. When engine starts, slowly movechoke leverto "Open"
position asengine warms. If engine falters, movechoke
leverto "Closed" position, then to "Open" position.
15. If enginefires, but doesnot continue to run,always point
gun in safe direction, press red botton and squeezespray
gun trigger to releasehigh pressure.Move choke leverto
"Open" position, and repeatsteps 12 through 14.
16. If enginefails to start after six pulls, movechoke leverto
"Open" position, and repeatsteps 12through 14.
NOTE:Always keepthe throttle lever in the "Fast" position
when operatingthe pressure washer.
10