Craftsman 580.7523 Pressure Washer User Manual


 
AFTEREACHUSE
Water should not remain in the unit for long periods of time.
Sediments or minerals can deposit on pump parts and
"freeze" pump action. Followthese procedures after every
use:
1. Shut off engine,turn off water supply, point gun in a
safe direction, pressred button and squeezetrigger to
relievetrapped pressure and letengine cool.
WARHJHG
The high pressure stream of water that this
equipment produces cancut through skin and its
_ nderlying tissues, leadingto serious injury and
)ossible amputation.
Spray gun traps high water pressure,evenwhen
engine is stopped and water is disconnected,
which can cause injury.
. Keephighpressurehoseconnectedto pumpandspraygun
whilesystemispressurized.
. ALWAYSpointspraygunin safedirection,pressredbutton
andsqueezesprayguntriggerto releasehighpressure,every
time youstopengine.
2. Disconnecthose from spray gun and high pressure
outlet on pump. Drainwater from hose, gun, and spray
tip extension. Usearag to wipe off the hose.
3. Empty pump of all pumped liquids by pulling recoil
handleabout 6 times. This should removemost liquid in
pump.
4. Coilhigh pressure hose on hook provided on handle.
5. Store unit in a clean, dry area.
6. If storing for morethan 30 days see Long Term Storage
on next page.
WARHJHG
_ uel and its vapors are extremely flammable and
explosive.
Fireor explosion cancause severeburns or
death.
WHENSTORINGFUELOREQUIPMENTWITHFUELIN TANK
. Storeawayfromfurnaces,stoves,waterheaters,clothes
dryers,or otherappliancesthathavepilotlightor otherignition
sourcebecausetheycanignitefuelvapors.
2O