Filter
Top Products
4-24
Routine Service and Maintenance
Replacing the Digging Teeth
Due to the high amount of wear placed on the digging teeth, you will need to replace them
periodically. To replace a single tooth (Items 3 and 5, Figure 4–20), remove the bolts and nuts
(Item 1 and 2, Figure 4–21) securing the tooth to remove it, and then install a new tooth in the
same position.
The spacer tubes (Item 4, Figure 4–21) will fall free. Make sure to reinstall these when the new
tooth is installed.
Torque the bolts securing the teeth to 27 to33 ft.-lb.
Figure 4–21 Tooth Replacement
NOTICE
5
4
3
2
1
2310