Filter
Top Products
4-15
Routine Service and Maintenance
10. Loosen the cable clamps and remove the cable from the battery. Clean the terminals with a
battery brush. Reinstall and secure the cable clamps.
11. Check the battery hold down clamp (Items 4 and 7, Figure 4–14) to make sure that the
battery is being held securely to the machine.
If the battery needs to be replaced, make sure to dispose of the
old battery according to local regulations.
Figure 4–14 Battery and Connections
NOTICE
1
2
3
8
4
5
6
7
2452