Filter
Top Products
4-14
Routine Service and Maintenance
Figure 4–13 Fuel Filter Replacement
Make sure to clean up any spilled fuel from in and around the engine compartment of the
machine. Spilled fuel may be ignited by a hot engine.
5. Check battery signs of leakage or for corrosion on the battery cables.
• On a monthly basis, check the battery (Item 8, Figure 4–14) for signs of leaking electrolyte.
If any signs of damage are visible, remove and replace the battery.
Wear the proper protective clothing when handling the battery. Leaking battery fluid
contains acid that can cause burns. Fumes from the leaking fluid can cause respiratory
problems.
6. To prevent corrosion, spray on a battery protectant and sealer onto both terminals and cable
clamps after cables are installed.
7. The electrical system on this machine is a NEGATIVE ground system.
8. Remove the service access panel to access the battery and cables.
9. Check both of the battery cables (Items 5 and 6, Figure 4–14) for signs of damage or
corrosion.
2
3
3
1
2451
CAUTION
CAUTION