Filter
Top Products
6-7-06 - Fifth Proof
4-8
Routine Service and Maintenance
Figure 4–10 Loader Arm Lift Cylinder Base Lubrication Point
NOTE: Extremely dusty or dirty working conditions may require more frequent service/
replacement.
8. Check all 4 tires for the proper tire pressure. The proper pressure level is shown on the side
of the tire. Make sure that the tires are not worn or damaged.
9. Check for loose or missing fasteners.
a. Inspect for any loose or missing bolts or fasteners.
b. Tighten or replace any missing bolts or fasteners before operating the machine..
10.Clean the engine oil cooler fins (Item 1, Figure 4–11) of any dirt or debris.
If you are performing this service after a period of machine operation, the oil cooler
assembly will be very hot. Wear gloves to protect your hands.
2034
CAUTION