Filter
Top Products
6-7-06 - Fifth Proof
4-2
Routine Service and Maintenance
Daily Maintenance Procedures
Do the following procedures daily or every 10 operating hours:
1. Check condition of all warning and instructional decals. Before operating the machine,
replace any missing or damaged decals.
NOTE: Make sure to read and understand all WARNING and SAFETY decals before
operating the machine.
2. Check engine fuel and fill as needed - be sure engine is OFF
a. The Brute has a saddle tank (Item 1, Figure 4–1), on each side of the machine.
Figure 4–1 Fuel Level Check
b. Each of the tanks has a gas gauge located in the filler cap (Item 2, Figure 4–1). Remove
cap and visually inspect fuel level to make sure that the indicator is showing the proper
fuel level. Make sure that each tank has been filled on a daily basis.
Carefully pour gas into the tank, not exceeding the max fill indication shown by the gauge
in the fuel cap.
• Allow engine to cool before filling fuel tanks.
• Do not overfill because gas could spill onto hot engine parts and ignite or explode.
2131
CAUTION