Filter
Top Products
6-7-06 - Fifth Proof
3-21
Pre-Start Inspection and Operation
b. Remove the protective covers (Items 2, 6, Figure 3–30) from the attachment quick
connectors.
c. Wipe off the end of each of the connectors (Items1, 3, Figure 3–30) to remove any dirt or
debris.
Figure 3–30 Auxiliary Hydraulic Quick Connects
d. Insert the attachments’ male coupling (Item 3, Figure 3–30) into the female bulkhead
quick connect coupling (Item 1, Figure 3–30) on the machine and push until the connector
locks into position.
e. Repeat the above process to connect the attachments’ female quick connect (Item 5,
Figure 3–30) on the other hose to the male bulkhead connector (Item 4, Figure 3–30) on
the machine.
f. Check the security of both connections by gently tugging on the attachment hoses to make
sure that the quick connects are seated properly.
1
2
4
5
6
3
2024