Filter
Top Products
6-7-06 - Fifth Proof
3-17
Pre-Start Inspection and Operation
4. When the machines mounting plates top edge is seated in the attachment mounting plate, curl
the machines mounting plate backwards slightly to allow the lower edge of the machines
mounting plate to slide into position. See Figure 3–22.
Figure 3–22 Attachment Installed
5. Shut the engine off.
6. Rotate the attachment lock pins (Item 1, Figure 3–22 and Item 1, Figure 3–23) into the
locked position, securing the attachment to the machine.
Figure 3–23 Attachment Locks in Locked Position
7. Test the security of the attachment connection by fully lowering with loader arm and tilting
the attachment downwards until the front tires slightly lift off the ground.
1
2029
11
2022
Pins Locked