Filter
Top Products
6-7-06 - Fifth Proof
3-22
Pre-Start Inspection and Operation
11.Make sure that the hydraulic hoses are routed so that they will not be in the way or damaged
during machine operation. Figure 3–31 shows how the hoses might be routed to keep them
out of the way during operation and prevent them from being damaged.
Figure 3–31 Attachment Hydraulic Hose Routing
12.The attachment is now ready to use.
Before starting the engine, make sure that the Auxiliary Hydraulic control lever is in the
NEUTRAL position. If this control is left in either the forward or reverse position and the
engine is started, the attachment will begin to function.
2025
CAUTION