Filter
Top Products
CLARKE TECHNOLOGY Operator's Manual -Encore S20E Page -7-
How to Remove the Machine From a Van or
Truck
1. Make sure there are no obstructions in the area.
2. Make sure the unloading ramp is at least eight
(8) feet long and a minimum of 32" wide, and
strong enough to support the machine.
3. Make sure the ramp is clean and dry.
4. Put the ramp in position.
5. Unfasten the machine.
WARNING: The machine is heavy. Make
sure you use two able
persons to assist in moving
the machine down the ramp.
6. Get two people to pull machine off ramp. It is
recommended that the machine be unloaded in
the forward position.
7. As the machine begins to travel down the ramp,
use two people to maintain a slow downward
speed.
8. Replace squeegee assembly, brush housing,
and brush or pad driver after machine is un-
loaded and ready to use.
Procedures For Transpoting (cont.)