Filter
Top Products
CLARKE TECHNOLOGY Operator's Manual -Encore S20E Page -15-
PROBLEM CAUSE ACTION
The cleaning is not even.
The scrub brush or pad is worn.
There is damage to the brush assembly,
caster or the solution valve.
The brush motor is not running
The solution level is low.
The machine loses power
Main switch is off.
Power cord disconnected.
Wall circuit breaker blown.
The machine does not run.
Replace the scrub brush or pad.
Have an authorized service person make
the needed repairs.
Check for tripped breaker. Reset. Check
for loose connections.
Fill the solution tank.
NOTE: If the problem continues consult
an authorized service person.
Reset the circuit breaker.
Do not use an extension cord.
Turn main switch on.
Reconnect power cord.
Reset wall circuit breaker.