Filter
Top Products
CLARKE TECHNOLOGY Operator's Manual -Encore S20E Page -17-
Figure 1
A
Do These Procedures When You Begin Your Work
Period
NOTE: Always engage the parking brake (if equipped)
before servicing the machine.
Keep the machine clean. It will need fewer repairs and
have a longer life.
1. Connect machine power cord to electrical outlet.
2. Make sure the recovery tank lid is on correctly.
See figure 1.
3. Make sure the Screen filter over the vacuum motor
is clean and in position. See figure 1 (a)
4. Make sure the valves on the drain hoses are clean.
Tightly close the valves.
5. Make sure brush housing and skirt are in
position on the brush head.
6. Make sure the brush is in position and
installed correctly
7. Check the installation of the squeegee and
squeegee hose.
MAINTENANCE