Cisco Systems 1500 Series Weather Radio User Manual


 
Cisco Confidential - Draft 1
2-20
Cisco Aironet 1500 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-9977-05
Chapter 2 Mounting Instructions
Mounting the Access Point
Step 5 From the pole mount kit, use the two short bolts, lock washers, and flat washers to loosely attach the two
adjustment plates as shown in Figure 2-10.
Note Do not over-tighten the bolts. You will need to adjust the access point orientation.
Figure 2-10 Access Point Attached to the Pole Clamp
Step 6
If necessary, rotate the access point until the top edge of the housing is horizontal, and tighten the two
short bolts on the adjustment plates. Torque the bolts to 15 to 20 ft. lbs. (20 to 27 Nm).
Step 7 Continue with the “Grounding the Access Point” section on page 2-21.
142688