Cisco Confidential - Draft 1
2-19
Cisco Aironet 1500 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-9977-05
Chapter 2 Mounting Instructions
Mounting the Access Point
Figure 2-9 Pole Clamp and Clamp Adjustment Plate Mounted on a Pole
Step 4
Adjust the top edge of the pole clamp until it is horizontal and tighten the bolts to 15 to 20 ft. lbs. (20
to 27 Nm)
Note If you need longer bolts, purchase 3/8–16 bolts of the correct length for your installation. Also,
the bolts can protrude up to 2 in (5 cm) and still allow the pole mount assembly to swivel and
rotate.
142687