Filter
Top Products
Cisco Confidential - Draft 1
2-15
Cisco Aironet 1500 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-9977-05
Chapter 2 Mounting Instructions
Mounting the Access Point
Mounting the Access Point on a Vertical or Horizontal Surface
To mount the access point on a vertical or horizontal surface such as a wall or a roof-overhang, use the
supplied mounting plate. For the correct access point mounting orientations, refer to the “Access Point
Mounting Orientations” section on page 2-12.
Step 1 The mounting plate is attached to the access point by two carriage bolts. Refer to Figure 2-6 for the
location of the carriage bolts securing the mounting plate.
Figure 2-6 Access Point Mounting Plate and Carriage Bolts
Step 2
Remove the nuts and washers from the carriage bolts and remove the carriage bolts.
Step 3 Remove the mounting plate from the access point.
1 Mounting plate 3 Grounding screw hole
2 Carriage bolts
170061
1
2
2
3