Filter
Top Products
3. From the front of tiller, insert the
forward clutch belt in between the bottom
of the engine drive pulley (I, Figure 5-18)
and the top of transmission pulley (K).
4. Insert the bottom half of belt into the
smaller, rear-most groove of the transmis-
sion pulley (F, Figure 5-17). Now slip the
top half of belt under the belt guide (H,
Figure 5-19) and onto the large groove of
engine drive pulley (L, Figure 5-17).
5. Reconnect the forward clutch cable to
the correct hole in the idler arm bracket,
as shown in Figure 5-16.
IMPORTANT: Belt must be installed on the
inside of the belt guide (G, Figure 5-19).
6. Reinstall the belt cover.
7. Test for correct tension on the forward
clutch belt (see Checking Forward Belt
Tension).
Figure 5-18: Arrow (K) shows insertion point
for installing new forward clutch belt.
Section 5: Maintenance 21
Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to
a complete stop, remove ignition key on electric start models, disconnect spark plug wire and move wire
away from spark plug.
Failure to follow these instructions can result in serious personal injury or property damage.
WARNING
Figure 5-19: Correct forward clutch cable
position.
G
H
I
O
P
K