Filter
Top Products
OPERATION
SE6 05/05 Operation Section 4-2
© 2005 Alamo Group Inc.
OPERATION
RHINO SE6 ROTARY MOWER
OPERATION INSTRUCTIONS
Rhino SE6 rotary mowers are manufactured with quality material by skilled workers. These mowers are
designed to cut grass, weeds, small brush and other vegetative material up to 1” diameter in areas such as
pastures, industrial areas, and roadsides. The mower is equipped with protective deflectors and/or chain
guards to prevent objects being thrown from the mower by the blades, however, no shielding is 100%
effective. All shields, guards, deflectors, and chains equipped on the unit must be maintained on the mower in
good operational condition.
It is the operator’s responsibility to be knowledgeable of all potential operating hazards and to take every
reasonable precaution to ensure oneself, others, animals, and property are not injured or damaged by the
mower, tractor, or a thrown object. Do not operate the mower if passersby, pets, livestock, or property are
directly in front or to the rear of the unit.
This section of the Operator’s Manual is designed to familiarize, instruct, and educate safe and proper mower
use to the operator. Pictures contained in this section are intended to be used as a visual aid to assist in
explaining the operation of a rotary mower and are not of a SE6 cutter. Some pictures may show shields
removed for purposes of clarity. NEVER OPERATE this implement without all shields in place and in good
operational condition. The operator must be familiar with the mower and tractor operation and all associated
safety practices before operating the mower and tractor. Proper operation of the SE6 mower, as detailed in
this manual, will help ensure years of safe and satisfactory use of the mower.
IMPORTANT: To avoid mower damage, retorque all bolts after the first 10 hours of operation. Retighten blade
carrier retaining nut on gearbox lower shaft to 300 ft. lbs.
READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS
MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND MOWER.
If you do not understand any of the instructions, contact your nearest authorized dealer for a full explanation.
Pay close attention to all safety signs and safety messages contained in this manual and those affixed to the
cutter and tractor. OPS-U- 0001
READ, UNDERSTAND, and FOLLOW
the following Safety Messages. Serious injury or
death may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards.
(SG-2)
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las
medidas de seguridad.
(SG-3)