Filter
Top Products
MAINTENANCE
VERSA PRO 03/09 Maintenance Section 5-21
© 2009 Alamo Group Inc.
MAINTENANCE
TO REPLACE SHIELDS
1. Make certain that all Driveline Canopy Shields are in good repair and rotate smoothly on the Drivelines.
Replace Bearings and/or Integral Shields if necessary.
2. Re-install Gearbox Canopy Shields with the same hardware and tighten securely.
ITEM PART NO. QTY DESCRIPTION
1 00754302 1 Flange Yoke
2 00755599 1 Clutch Support
3 00766810 1 Pressure Plate
4 00754314 2 Plate with Holes
5 00754202 4 Lining Ring
6 00754301 1 Bushing
7 00754303 8 Spring
8 00755600 2 Nut & Bolt
9 00754199 8 Nut & Bolt
10 00754201 1 Intermediate Plate
SLIP CLUTCH PRECAUTIONS
If MOWER is to sit outside FOR 30 DAYS or
more and be exposed to rain or humid air, the
CLUTCHES should be removed and STORED
IN A DRY AREA.
However, if CLUTCHES are left outside for 30
days or more, make certain that you follow
BREAK-A-WAY INSTRUCTIONS shown
below.
It is very important to check for and FREE-UP
EVERY FROZEN CLUTCH to prevent
drivetrain’s overloading and possible failure of
drivetrain or tractor components.