Alamo 803350C Lawn Mower User Manual


 
OPERATION
VERSA PRO 03/09 Operation Section 4-2
© 2009 Alamo Group Inc.
OPERATION
A L A MO I N D US T R I A L V E R S A P R O F L AI L
OPERATION INSTRUCTIONS
Alamo Industrial Versa Pro flail mowers are manufactured with quality material by skilled workers. These
mowers are designed to cut grass, weeds, small brush, and other vegetative material up to 2” in diameter. The
mower is equipped with protective deflectors and chain guards to prevent objects being thrown from the mower
by the blades, however, no shielding is 100% effective. All shields, guards, deflectors, and chains equipped on
the unit must be maintained on the mower in good operational condition.
It is the operator’s responsibility to be knowledgeable of all potential operating hazards and to take every
reasonable precaution to ensure oneself, others, animals, and property are not injured or damaged by the
mower, tractor, or a thrown object. Do not operate the mower if passersby, pets, livestock, or property are
within 100 yards of the unit.
This section of the Operator’s Manual is designed to familiarize, instruct, and educate safe and proper mower
use to the operator. Pictures contained in this section are intended to be used as a visual aid to assist in
explaining the operation of a Versa Pro flail mower and are not specific to any model. Some pictures may show
shields removed for purposes of clarity. NEVER OPERATE this implement without all shields in place and in
operational condition. The operator must be familiar with mower and tractor operation and all associated safety
practices before operating the mower and tractor. Proper operation of the mower, as detailed in this manual,
will help ensure years of safe and satisfactory use of the mower.
IMPORTANT: To avoid mower damage, retorque all bolts after the first 10 hours of operation. Refer to the
Torque Chart at the end of the Maintenance Section to ensure bolts are properly tightened.
Standard Equipment and Specifications
BASE UNIT SPECIFICATIONS
21’8” Overall Cutting Width
3/8” Box Fully Welded Frame
19-Gallon Reservoir with 10 Micron Filtration
Tandem Piston Pumps Rated @ 48 GPM @ 3800 PSI
Standard 1 year limited parts and labor warranty
WING MOWER SPECIFICATIONS
READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS
MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND
IMPLEMENT. If you do not understand any of the instructions, contact your nearest authorized dealer for a
full explanation. Pay close attention to all safety signs and safety messages contained in this manual and
those affixed to the implement and tractor. OPS-U- 0001
READ, UNDERSTAND, and FOLLOW
the following Safety Messages. Serious injury or
death may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards.
(SG-2)
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las
medidas de seguridad.
(SG-3)