Adelaide
10:00
GMT +9:30
SET
SELECT
CANCEL
CANCEL SETSELECT
WORLD TIME
HOME
DESTINATION
--
:
-- --
.
--
.
----
CANCEL SETSELECT
WORLD TIME
DESTINATION
HOME
10:00 15.MAR.2007
10:00 9:30
Seoul
- 0:30
Tokyo
SET
SELECT
CANCEL
3
1ST DAY
10:00 15.MAR.2007
100-0001
1/3
1ST DAY
10:00 15.MAR.2007
Registering local time at your overseas destination
(WORLD TIME)
City/area name
Difference with GMT (Greenwich
Mean Time)
Current time
at selected
destination
Select ‘WORLD TIME’ from SETUP menu (P.18,20)
‘PLEASE SET THE HOME AREA’ will be displayed when setting for
the first time. In this case, press ‘MENU/SET’ and skip to step .
If actual destination is unavailable,
select based on ‘difference with home
time’.
Current time
Difference with home time
Select ‘HOME’ Set your home area
Select
‘DESTINATION’
Set destination area
To set/release summer time
To set, go through steps , .
(Press again to release)
Finish
City/area name
Upon your return Go through steps , , , and press ‘MENU/SET’ to
finish.
Clock settings (P.16) will not be changed even if home summer time is set.
Pictures recorded when set to destination will be displayed with in PLAYBACK
mode.
If setting for second (or later) time, press ►.
Applications
(Record)
10
Useful features for travel
(TRAVEL DATE, WORLD TIME)
Record holiday day number or local time at overseas destination. Can be displayed
during playback or stamped onto picture. (P.66)
Clock must be set in advance (P.16).
Recording holiday duration (TRAVEL DATE)
Select ‘TRAVEL DATE’ from
SETUP menu (P.18, 20)
Select ‘SET’
1
/
4
WORLD TIME
MONITOR
± 0
CLOCK SET
SETUP
GUIDE LINE
SELECT SET
TRAVEL DATE
OFF
SET
Set departure date
TRAVEL DATE
PLEASE SET THE
DEPARTURE DATE
SELECT
2007MAR15
..
SET
Set return date
TRAVEL DATE
EXIT
PLEASE SET THE
RETURN DATE
-------
.
--
.
SELECT
Exit without entering if you do
not wish to set a return date.
Playback
Displayed for approx. 5 sec when
switching from PLAYBACK to
recording mode
Days elapsed
displayed
Recording
Note
To stop date recording, select ‘OFF’ in step .
When destination is set in ‘WORLD TIME’ (see right), days elapsed are calculated
based on local destination time.
If settings are made before holiday, number of days to departure are displayed in
orange with a minus sign (but not recorded).
When TRAVEL DATE is displayed in white with a minus sign, the ‘HOME’ date is one
day in advance of the ‘DESTINATION’ date (this is recorded).
To print number of elapsed days:
● Activate ‘DATE STAMP’ (P.66) before printing.
● Use the supplied software (P.11).
Area settings can be
aborted by pressing in
steps or .
