Applications
(Record)
3
Taking pictures with self-timer
Display ‘SELFTIMER’
Select time duration
OFF
10SEC.
2SEC.
10
2
SELFTIMER
SELECT SET
Displayed for approx. 5 sec.
Can also be selected with ◄.
Adjust focus
Press
halfway
Focus will be automatically
adjusted immediately before
recording if shutter button is
pressed fully here.
Take a picture
Press
fully
The self-timer indicator will flash, and the
picture will be taken after the selected
duration of time has elapsed.
To cancel while in operation: Press
‘MENU/SET’
This is also effective for correcting jitter when pressing the shutter button, by setting the
self timer to 2 seconds.
Self-timer indicator
MENU/SET
Applications
(Record)
2
Making LCD monitor easier to
see
Make it easier to see the LCD monitor when taking pictures from high positions or in
bright outdoor conditions.
Display ‘LCD MODE’
Hold down
Select mode
LCD
HIGH ANGLE
OFF
POWER LCD
LCD MODE
SELECT SET
POWER LCD
Makes screen brighter than normal (for
outdoor use).
HIGH ANGLE
Makes screen easier to see when taking
pictures from high positions.
(becomes harder to see from the front)
OFF: Normal
Note
‘HIGH ANGLE’ will be cancelled when power is turned off (including POWER SAVE).
Block out sunlight (with hand, etc) if reflection makes screen difficult to see.
‘HIGH ANGLE’ cannot be used in the following cases.
● SIMPLE MODE
● PLAYBACK mode
● PRINT mode
● During menu screen display
● While reviewing pictures
‘POWER LCD’ will be deactivated if no operations are performed for 30 seconds while
recording. (Brightness can be restored by pressing any button)
Brightness/colour of screen in ‘LCD MODE’ has no effect on pictures recorded.
LCD monitor
HIGH ANGLE
Note
This function cannot be used in the ‘UNDERWATER’ scene mode or in MOTION
PICTURE mode .
In some modes, only '2SEC.' or only '10SEC.' may be selected.
SIMPLE MODE: ‘10SEC.’
CLIPBOARD mode, SCENE mode ‘SELF PORTRAIT’: ‘2SEC.’
