A SERVICE OF

logo

2 Wiring and Connection
MITSUBISHI CNC
2 - 16
(5) How to insert the cable into 03JFAT-SAXGFS-XL, 05JFAT-SAXGSA-E-SS and 06JFAT-SAXGFS-
XL connector
Use the supplied cable connection lever.
The cable connection lever can be used for CNP1, 2 and 3.
1) Attach the supplied cable connection lever to the housing.
(Detachable)
2) Push the cable connection lever in the direction of arrow.
3) Hold down the cable connection lever
and insert the cable in the direction of arrow.
4) Release the cable connection lever.
Cable connection lever