A SERVICE OF

logo

Open as PDF
next previous
3 - 40
3 Setup
MITSUBISHI CNC
【#2283】 SV083 SSF6 Servo function 6
Select the servo functions.
A function is assigned to each bit.
Set this in hexadecimal format.
bit F-8 :
Not used. Set to "0".
bit 7-5 : nfd5 Depth of Notch filter 5
Set the depth of Notch filter 5.
bit7,6,5=
000: -∞
001: -18.1[dB]
010: -12.0[dB]
011: -8.5[dB]
100: -6.0[dB]
101: -4.1[dB]
110: -2.5[dB]
111: -1.2[dB]
Set the adaptive frequency of Notch filter 5 in "#2288 SV088 FHz5".
bit 4 :
Not used. Set to "0".
bit 3-1 : nfd4 Depth of Notch filter 4
Set the depth of Notch filter 4.
bit3,2,1=
000: -∞
001: -18.1[dB]
010: -12.0[dB]
011: -8.5[dB]
100: -6.0[dB]
101: -4.1[dB]
110: -2.5[dB]
111: -1.2[dB]
Set the adaptive frequency of Notch filter 4 in "#2287 SV087 FHz4".
bit 0 :
Not used. Set to "0".
nfd4
nfd5