A SERVICE OF

logo

5 - 31
MDS-D-SVJ3/SPJ3 Series Instruction Manual
5-2 Adjustment procedures for each control
#13035(PR) SP035 SFNC3 Spindle function 3
bit C : shgn SHG control
0: Stop 1: Start
bit A : pyn Excitation rate selection
0: Select Excitation rate 1 1: Select Excitation rate 2
bit 9 : vgn Speed loop gain set selection
0: Select Set 1 1: Select Set 2
bit 7 :
Not used. Set to "0".
#13038 SP038 FHz1 Notch filter frequency 1
Set the vibration frequency to suppress when machine vibration occurs.
(Enabled at 50 or more.)
When not using, set to "0".
---Setting range---
0 to 2250 (Hz)