44 Adjust Speaker Volume
VX3X User’s Guide E-EQ-VX3XOGWW-E
Adjust Speaker Volume
The speaker is located on the front of the device above the Power button. The audio volume can
be adjusted to a comfortable level for the user. The volume is increased or decreased one step
each time the volume key is pressed. The device has an internal speaker and a jack for an external
headset. Operational “beeps” are emitted from the speaker.
Using the Keypad
Note: Volume & Sounds (in Control Panel) must be enabled before the following key sequences
will adjust the volume.
To adjust speaker volume, locate the <F8> key at the top of the keypad. Adjust the
speaker volume by pressing the:
2
nd
key then the <F8> key to enter Volume change mode.
Use the Up Arrow and Down Arrow keys to adjust volume until the speaker volume is
satisfactory.
Press the Enter key to exit this mode.
The LED for the 2
nd
key blinks until the special editing mode (set audio speaker volume) is
complete.
Using the Touchscreen
Select Start | Settings | Control Panel | Volume & Sounds | Volume tab. Change the volume
setting and tap OK to save the change. You can also select / deselect sounds for key clicks and
screen taps and whether each is loud or soft.
As the volume scrollbar is moved between Loud and Soft, the computer will emit a tone each time
the volume increases or decreases in decibel range.
Microsoft Windows CE Event Sounds
The VX3X includes a customized sound scheme. The customized WAV files are preferable to the
standard Microsoft Windows CE sounds when using the internal speaker.
