E-EQ-VX3XOGWW-E VX3X User’s Guide
Operation
Power Button
The power button is located above the ESC key on the keypad. After power is connected, the
Power button must be pressed to turn the device on.
Figure 32 Location of the Power (PWR) Button
Quickly tapping the Power button places the device immediately in Suspend mode. Quickly
tapping the Power button again, or touching the screen, immediately returns the device from
Suspend.
Power Management
Because the VX3X is powered by the vehicle battery, power management options are limited.
The display backlight can be configured to turn off after a specified period of inactivity. Please
see the “VX3X Reference Guide” for configuration details.
The VX3X can be placed in Suspend Mode. To enter suspend mode, tap the power button and
release or select Start | Suspend. To exit suspend tap the screen, press any key or tap the power
button.
Restart Sequence
Tap Start | Run, then type warmboot in the textbox and press Enter. If the touchscreen is not
accepting taps or needs recalibration, press <Ctrl>+<Esc> to force the Start Menu to appear.
When the Windows desktop is displayed or an application begins, the power on (or reboot)
sequence is complete. If any changes to the settings had been saved previously, they are restored
on reboot. There may be slight delays while the wireless client connects to the network, re-
authorization for voice-enabled applications completes, Wavelink Avalanche management of the
VX3X startup completes, or Bluetooth relationships establish or re-establish.
