A SERVICE OF

logo

USB-H Port 33
E-EQ-VX3XOGWW-E VX3X User’s Guide
USB-H Port
Some endcap configurations contain a USB host port. This port is labeled USB-H. Please refer to
“Components” earlier in this manual for port identification.
Caution – Do Not Use the USB-H Labeled Port for scanners, PC serial cables or printers.
The USB-C connector accepts an adapter cable which provides a USB host port. Cable requires a
nine-pin D-shell female connector for the VX3X.
UBS Host Type A
USB Host Type B
Port Label on Endcap
RS-232
USB-C
Figure 23 Connect USB-H Cable
1. Power off the VX3X before connecting the cable to the VX3X.
2. Seat the connector firmly over the pins and turn the thumbscrews in a clockwise
direction. Do not overtighten.
3. Use a strain relief clamp to secure the cable.
4. Press the power button to power up the VX3X.