8-10 HP Jetdirect Configuration Page Messages
LOST FRAMES: Number of times the end of the frame could not be
detected while transmitting.
MEMORY ERROR Run the power-on self-test: turn the printer off, then on
again. If the error persists, call the Customer Care
Center (see Chapter 1 for telephone numbers).
MFG ID: The manufacturing identification code.
NDS
AUTHENTICATION
ERROR
Unable to log onto the NetWare directory tree. Make
sure that the print server object is defined in the
directory at the correct context.
NDS CONNECTION
STATE ERROR
The HP Jetdirect print server cannot change the NDS
connection state. Check licenses on the spooling
server.
NDS ERR: CANNOT
READ Q HOST
Cannot locate the file server on the network. The server
may not be running at this time or a communications
problem may exist.
NDS ERR: CHANGE
PSSWD FAILED
Cannot modify the print server password to the value
expected by the HP Jetdirect print server.
NDS ERR:
EXCEEDS MAX
SERVERS
More queues were assigned than can be handled by
the HP Jetdirect print server. Remove one or more print
queues from the list to be serviced by Queue Server
Mode.
NDS ERR: INVALID
SRVR VERS
The current version of the NetWare file server is not
supported.
NDS ERR: MAX
PRINT OBJECTS
Too many printer objects are assigned to the print
server object. Reduce the number of printer objects
assigned to the print server using NWADMIN.
NDS ERR: MAX
QUEUE OBJECTS
Too many print queue objects are assigned to the
printer. Reduce the number of queues assigned.
NDS ERR: NO
PRINTER OBJECTS
No printer objects are assigned to the print server object
configured to this HP Jetdirect print server.
Table 8.2 General HP Jetdirect Messages (7 of 15)
Message Description
0Book-asF01.book Page 10 Tuesday, August 14, 2001 2:06 PM
