5-2 Using the Embedded Web Server
Supported Web Browsers
●
Windows platforms:
■
Netscape Navigator 4.00, 4.01, 4.02, 4.03, 4.05, 4.06, 4.08
■
Netscape Communicator 4.5, 4.51, 4.6
■
Microsoft Internet Explorer 4.0 with update SP1, 4.01, 5.0
●
HP-UX:
■
Netscape Navigator 4.08
■
Netscape Communicator 4.5, 4.51, 4.6
■
Microsoft Internet Explorer 4.0
●
Solaris:
■
Netscape Navigator 4.06, 4.08
■
Netscape Communicator 4.51, 4.6
■
Microsoft Internet Explorer 4.0
Supported HP Web JetAdmin Version
HP Web JetAdmin is a printer installation and management
application for intranets and is available from HP Customer
Care Online at http://www.hp.com/support/net_printing.
HP Web JetAdmin version 6.0 or later is recommended for
operation with the HP Jetdirect embedded web server.
Viewing the Embedded Web Server
Before you can use the embedded web server, the HP Jetdirect
print server must be configured with an IP address.
There are many ways to configure an IP address on the print
server. You can automatically configure IP parameters over the
network using BootP (Bootstrap Protocol) or DHCP (Dynamic
Host Configuration Protocol) each time the printer is turned on.
Or, you can manually configure IP parameters using the
printer’s control panel (for selected printers), Telnet,
HP Web JetAdmin, or other management software.
0Book-asF01.book Page 2 Tuesday, August 14, 2001 2:06 PM
