HP Jetdirect Configuration Page Messages 8-7
Config. Page
Messages
8
INITIALIZING
TRYING TO
CONNECT TO
SERVER
The HP Jetdirect print server is trying to connect to the
NetWare server(s). This is a normal message. Wait
until the connection is established or another status
message appears.
INVALID GATEWAY
ADDRESS
The default gateway IP address specified for the
HP Jetdirect print server (through BOOTP or
NOVRAM) is an invalid IP address for specifying
a single node.
INVALID IP
ADDRESS
The IP address specified for the HP Jetdirect print
server (through BOOTP or NOVRAM) is an invalid
IP address for specifying a single node.
INVALID SERVER
ADDRESS
The TFTP server IP address specified for the
HP Jetdirect print server (through BOOTP) is an
invalid IP address for specifying a single node.
INVALID SUBNET
MASK
The IP subnet mask specified for the HP Jetdirect print
server (through BOOTP or NOVRAM) is an invalid
subnet mask.
INVALID SYSLOG
ADDRESS
The syslog server IP address specified for the
HP Jetdirect print server (through BOOTP) is an
invalid IP address for specifying a single node.
INVALID TRAP
DEST ADDRESS
One of the SNMP trap (Trap PDU) destination IP
addresses specified for the HP Jetdirect print server
(through TFTP) is an invalid IP address for specifying
a single node.
LAN ERROR-AUTO
REMOVAL
Run the power-on self-test: turn the printer off, then
on again. If this message reappears on another
configuration page, you may have a problem with one
of the HP Jetdirect print servers on your network.
Check all the print servers on the network for proper
operation.
Table 8.2 General HP Jetdirect Messages (4 of 15)
Message Description
0Book-asF01.book Page 7 Tuesday, August 14, 2001 2:06 PM
