6-4 FTP Printing
If login is successful, a message “230” will be displayed on the
client system. In addition, the available HP Jetdirect ports for
printing will be displayed. HP Jetdirect external print servers
with multiple ports will display all available ports, with Port1
the default port. To change ports, use the FTP cd (change
directory) command. For an example of a successful login, see
“Example of an FTP Session.”
Ending the FTP Session
To end an FTP session, type quit or bye.
Commands
The following table summarizes commands available to the user
during an FTP printing session.
Command Description
user <username> <username> specifies a user. Any user will be
accepted and can print to the selected port.
cd <port#>
<port#>
selects a port number for printing. For HP Jetdirect single-port print servers, only port1
is available. For multiport print servers, specify
port1 (default), port2, or port3.
cd/ / specifies the root directory of the HP Jetdirect
FTP server.
quit quit or bye terminates the FTP session with the
HP Jetdirect print server.
bye
dir dir or ls displays the contents of the current
directory. If this command is typed in the root
directory, a list of available ports for printing is
displayed. For multiport print servers, the
available ports for printing are PORT1 (default),
PORT2, and PORT3.
ls
0Book-asF01.book Page 4 Tuesday, August 14, 2001 2:06 PM
