![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/6/3b/63b60a6c-6300-4231-addb-626edab7087c/63b60a6c-6300-4231-addb-626edab7087c-bg37.png)
55
ENGLISH
Creating lists of favourites
(Analogue)
You can select your favourite channels and save
them in up to four favourites lists (Fav 1 to Fav 4).
1 In the
»PROGRAME TABLE« menu, switch
over to the list view with »●« (yellow).
2
Select the preferred channel with »
C
«
or
»
D
«.
3 Use »
B
« or »
A
« to ”push“ the channel into
one of the favourites lists 1 to 4 and press
»OK« to confirm.
– The position in the favourites list is marked
with
»●«.
– You can enter the same channel in more
than one favourite list.
–
Each favourite list can store up to 255 chan-
nels.
Note:
7
Channels can also be deleted from favour-
ites lists. Select
the
channel to be deleted
with
»
C
«, »
D
«, »
B
« or »
A
«
and delete it
with
»OK«.
Exiting the settings
1 Press »M« to end the setting.
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
Entering channel names (8 digit
maximum)
1 In the »PROGRAME TABLE« menu, select the
television channel with
»
C
«, »
D
«, »
B
« or
»
A
« and press »●« (red) to confirm.
2 Open the input keyboard with
»●« (green).
Note:
7
If necessary, delete the current channel
name. To do this, select the
» « button
with
»
B
« or »
A
« and delete repeatedly
using
»OK«.
3 Select the required letters or numbers with
»
C
«, »
D
«, »
B
« or »
A
« and confirm with
»OK«.
Repeat the entry for further letters/numbers.
Note:
7
Use the »ABC«, button to switch to upper
case letters and use the »?@123« button to
switch to symbols and numbers.
4 Save the channel name by using
»
C
«, »
D
«,
»
B
« or »
A
« to select »Submit« and confirm
with
»OK«.
Note:
7
If you wish to enter other channel names,
repeat steps 1 to 4.
Skipping television channels
You can highlight television channels to be
skipped when you select with
»
D
« or »
C
«.
Selection is still possible using the number
buttons.
1 In the
»PROGRAME TABLE« menu, switch over
to the list view with »●« (yellow).
2 Select the preferred channel with
»
C
«
or
»
D
«.
3 Select the column
»Skip« with »
B
« or »
A
«
and use
»OK« to mark the channel.
– The channel is marked using
»●«.
Note:
7
Channels can also be reactivated. Select the
channel with
»
C
« or »
D
«, then select the
column
»Skip« and reactivate the channel
with
»OK«.