51
ENGLISH
Searching for television channels
from the cable provider manu-
ally
1 Open the menu with »M«.
2 Select the line
»SOURCE SETUP« with »
C
«
or
»
D
« and press »OK« to confirm.
– The
»SOURCE SETUP« menu appears.
3 Select the line
»Source« with »
C
« or »
D
«
and press
»OK« to confirm.
Select the option
»Cable« with »
B
«, »
A
«,
»
C
« or »
D
« and press »OK« to confirm.
4 Select
» Digital Manual Tuning« with »
C
« or
»
D
« and press »OK« to confirm.
– The menu appears.
5 Enter the four-digit frequency with
»1...0«
and press
»OK« to confirm.
–
The search starts after confirming, the
channels found are displayed in the
»Re-
sults
« menu.
6 Press »M« to finish the setting.
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
Searching for digital terrestrial
TV channels automatically
1 Open the menu with »M«.
2 Select the line
»SOURCE SETUP« with »
C
«
or
»
D
« and press »OK« to confirm.
– The
»SOURCE SETUP« menu appears.
3 Select the line
»Source« with »
C
«
or
»
D
« and press »OK« to confirm.
Select the option
»Air« with »
B
«, »
A
«, »
C
«
or
»
D
« and press »OK« to confirm.
Caution:
7
The antenna power supply (line »Active
Antenna Power
«) may only be switched on
if the antenna is an active indoor antenna
with a signal amplifier and it is not already
supplied with a voltage via a mains plug
(or similar supply). Otherwise you may
cause a short circuit and irreparably dam-
age your antenna.
4 Select the
»Active Antenna Power« with »
C
«
or
»
D
«. Switch on the antenna power sup-
ply for the antenna with
»
B
« or »
A
« (»On«).
5 Select the line
»Automatic Channel Search«
with
»
C
« or »
D
« and press »OK« to con-
firm.
– The menu appears.
Exit
Back
SOURCE SETUP
AUTOMATIC CHANNEL
SEARCH
20.09.2010
15:46
Start Search
Scan Type
Country
Connection Type
U.K.
Air
ATV & DTV
