ENGLISH
54
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
Note:
7
If you wish to remedy other television
channels, repeat steps 4 to 8.
8 Press
»M« to end the setting.
Changing stored analogue
channels
If channels were stored with the automatic chan-
nel search while tuning the television channels,
you can delete them. You can also store chan-
nels in a different preset, change or enter the
name of a channel as well as skip channels.
Selecting a channel list
1 Open the menu with »M«.
2 Select the line
»SOURCE SETUP« with »
C
«
or
»
D
« and press »OK« to confirm.
– The
»SOURCE SETUP« menu appears.
3 Select the line
»Program Table« with »
C
«
or
»
D
« and press »OK« to confirm.
– The
»PROGRAME TABLE« menu appears.
Note:
7
Additional operations are explained in the
following sections.
Deleting channels
1
In the »
PROGRAME TABLE
« menu, select the
television channel to be deleted with
»
V
«,
»
D
«, »
B
« or »
A
« and press »●« (red) to
confirm.
2 Press
»●« (yellow) to confirm the deletion
process.
Note:
7
»●« (blue) allows all television channels to
be deleted.
3 Press
»●« (green) to confirm the deletion
process.
Tuning the television channels by
entering the channel numbers
1 Open the menu with »M«.
2 Select the line
»SOURCE SETUP« with »
C
«
or
»
D
« and press »OK« to confirm.
– The
»SOURCE SETUP« menu appears.
3 Select the line
» Analogue Manual Tuning«
with
»
C
« or »
D
« and press »OK« to con-
firm.
– The menu appears.
Program No
TSystem
Band
Channel
Fine Tuning
1
INSTALLATION
ANALOGUE MANUAL TUNING
BG
C
2
0
Auto Previous
Auto Next Store
48.25 MHz
4 Select the line »Program No« by pressing »
C
«
or
»
D
« and use »
B
« or »
A
« to save the pre-
set.
5 Select
»Band« by pressing »
C
« or »
D
« and
use »»
B
« or »
A
« to choose between »S«
(special channel) or »C« (normal channel).
6 Select the line
»Channel« with »
C
« or »
D
«
and enter the channel number with »
B
« or
»
A
« step by step, or use »1…0« to enter it
directly.
Notes:
7
The current system is displayed in the
»System« line. If the colour or sound is
not functioning properly, select the line
»System« with »
C
« or »
D
«. Use »
B
« or
»
A
« to select the preferred setting.
7
If fine tuning is necessary, select the line
»Fine Tuning« with »
C
« or »
D
« and use
»
B
« or »
A
« to make the setting.
7 Press
»●« (blue) to save the setting.
