47
ENGLISH
Hi-fi system/AV receiver
Playing the audio signal via the
HiFi system
1 Connect the »U« sockets on the television to
the corresponding socket of the AV receiver
with an cable (digital audio signal).
Note:
7
If this function is not activated, the audio sig-
nal is transmitted to the HiFi system/AV re-
ceiver (connected to
»U« 3.5 mm ø jack
plug) into the headphone socket on the left
side of the television.
1 Open the menu with
»M«.
2 Select the menu item
»SOUND SETTINGS«
with
»
C
« or »
D
« and press »OK« to con-
firm.
– The
»SOUND SETTINGS« menu appears.
3 Select
»Audio Output Setup« with »
C
« or
»
D
« and press »OK« to confirm.
– The menu appears.
4 Select the line
»Audio Out« with »
C
« or
»
D
« and press »
B
« or »
A
« to activate the
audio output (
»Line Out«).
5 Select the line
» Audio Out Status« with »
C
«
or
»
D
« and select the option »Fixed« or
»Adjustable« with »
B
« or »
A
«.
OPERATION USING EXTERNAL DEVICES
-----------------------------
Notes:
7
When »Adjustable« is selected, Line Out
volume will be the same with the current
speaker's volume.
When you change the
volume with »V+« or »V–« button, the
volume of speaker and Line Out will change
together.
7
If the audio should only be output via the
HiFi system/AV receiver, select the option
»Off« in the line »TV Speaker with »
B
« or
»
A
«.
6 Press
»M« to end the setting.
“Dolby” and the double-D logo are trademarks of
Dolby Laboratories.
Manufactured under licence from Dolby Laboratories.
